Transcribed from the Artesprix Blog of almost the same title: July 12, 2022.
This post may contain affiliate links. That means that I may receive compensation if you purchase through the links I have provided. The price you pay for the product or service is not higher, but I may get compensated. All thoughts and reviews of the products used are my own.
Chelsea Rose here! I’m a mom, maker, baker, and military spouse. It’s July and Artesprix has a Beverage Caddy as their Blank of the Month. This sublimated rose motif beverage caddy will be so cute with sparkling lemonade or rosé. In this blog, we’ll cover how to do a tape resist to keep an area that’s getting stenciled clear so you have a blank space for another color, the leaves!
What is Sublimation?
When something has been sublimated it means the design was applied with sublimation ink. When heated the sublimation ink molecularly fuses to poly-based or poly-coated substrates (also known as blanks or substrates). Artesprix creates a line of sublimation mediums (markers, stamp pads, stamp pad refills, and acrylic style paint!) and offers compatible blanks and other supplies as well.
- Artesprix Beverage Caddy
- Artesprix Stamp Pads (Pink, Purple, Green)
- Artesprix Marker 10 count
- Stamp Anniething Roses Stencil
- Mixed Media Paper
- Painter’s Tape or Washi Tape
- Blending Sponge (or Blending Brush)
- Protective Paper
- Heat Resistant Tape
- Plastic Sheet
- Heat Source: Home Iron or Heat Press
Step 1 for a Sublimation Rose Motif Beverage Caddy:
Trace your blank on paper with a pencil! Pencil will not interfere with your design.
Pro Tip: If you don’t have stamp blending brushes, you can use a makeup blending sponge, it will only be good for sublimation ink going forward so keep that in mind.
Make leaf shapes out of painter’s or washi tape. Use a low-stick tape that will be able to peel off later without ripping your paper.
Tape the stencil to one half of your project, this stencil from Stamp Anniething is perfect because it repeats! Just shift it over and it’s a perfect continuation of the design.
Pro Tip #2: Cover the exposed side of your template with a spare scrap of paper to protect it from excess ink. Look for the design process on my youtube!
Concentrate the darkest value of color on the outside edges and fade to the lighter value in the center. I used the pink and purple stamp pads for a pink purple gradient. You may want to blot off the first parts of the color from your utensil to get a lighter color. A little Artesprix ink goes a long way!
After the whole template has the stenciled design, peel off the leaf shapes to reveal the blank spaces. Add greens with Artesprix markers to color in some cute veined leaves in the pattern of roses. Use the almost dried out sponges to blend your design with the stark white background. You can outline some of the roses with the Artesprix markers, too!
Tape your completed design to the blank. Three or four pieces is fine when using a heat press.
Next, make a “sandwich” with Artesprix’s siliconized protective paper that goes around your blank and the secured design. From bottom to top it should be: protective paper, blank, design, protective paper, then heat source. This protective paper protects your heat press and equipment from the Iron-on-Ink. If you don’t have Artesprix’s brand, parchment paper will work. I will say that the Artesprix protective paper is professional quality for the home maker and I’ve been thoroughly impressed by it.
This project presses at 400°F for 75 seconds. To double check the recommended press times go to Artesprix’s directions site.
After 75 seconds has elapsed it’s time for the “peek test”! Be careful – the blank is hot! Try to peek without removing the tape, that way if the project needs more time, your design is still lined up which will prevent ghosting.
Step 10 to complete the Sublimation Rose Motif Beverage Caddy:
Once you have confirmed your transfer was successful, remove the entire design to see your transferred Iron-on-Ink project.
After the beverage caddy cools, I will set it up with a pair of champagne flutes I hand painted that go along with the rose motif! So perfect!
Whether it’s a picnic date with my boys or a little wind down on the patio with my husband, we can bring sparkling rose lemonade or rosé and have a decorative and refreshing centerpiece with our sublimated rose motif beverage caddy. This project will be coming back with us to the States for when I can get that delicious Belvior Elderflower Rose Lemonade again.
Check out other ways to decorate the beverage caddy blank on Artesprix’s blog. If you want to see what I’m up to in Japan – come follow along over on instagram (I put lots of fun foods that we try in my stories), or check out my last project with Stamp Anniething stamps and sublimation ink here.
Thank you for reading and we would love to see what you sublimate with Iron-on-Ink!