Skip to content

How To: Starry Iron-on-Ink Satin Necktie

    September 09, 2022

    Transcribed from the Artesprix Blog of almost the same title: October 18, 2022.

    This post may contain affiliate links. That means that I may receive compensation if you purchase through the links I have provided. The price you pay for the product or service is not higher, but I may get compensated. All thoughts and reviews of the products used are my own.

    Hello! Today’s Artesprix project on the blog: Starry Iron-on-Ink Satin Necktie. I’m Chelsea Rose, I’m a momma of two (and a dog), a military spouse and ex-art teacher turned baker. For this project using a homemade gel printing plate and a stencil, I was inspired by the recent images that have come out from NASA’s newest telescope the James Webb Telescope. I will be using Artesprix’s featured Blank of the Month, the Satin Necktie, which is only available for the month of September, so do not wait to get yours! Wait until you see how using a dual color gel plate printing technique with stencils allows you to create cool techniques!

    final product of the starry iron-on-ink satin necktie surrounded by pieces of the design after the heat press reveal

    What is Artesprix Iron-on-Ink?

    Sublimation Ink or Iron-on-Ink is a medium that once applied with heat and pressure to a polyester fabric or coated product will fuse completely and become one with the object. There is no peeling or rubbing off once transferred. And it won’t wash away either! It’s science-y magic!

    showing the supplies of stencils, gel press plate, pencil, sublimation acrylic paint, satin neck tie, squirt bottle

    Materials for Starry Iron-on-Ink Satin Necktie:

    Step-by-Step Tutorial for Starry Iron-on-Ink Satin Necktie:

    Step 1: 

    Gather supplies and dream of the color scheme you want to create with. I wanted to do stars and it took awhile to pull prints that I loved for this project with the stencil. As for a template, I knew I needed a lot of prints if I was going to cover the entire Necktie. I ended up creating ~ 10 plus prints. 

    showing how the ink comes off the gel press plate for the starry iron-on-ink project

    Step 2:

    Have a stack of papers ready, as well as a smoother or brayer to help transfer your design onto your paper from the gel printing plate.

    many starry iron-on-ink pulls from the gel press plate

    Step 3: 

    Make a background color on the gel printing plate with Artesprix acrylic sublimation paint (blue and black), the lightener (white), and the stamp pad refill bottle in (blue). Then, lay down a stencil. Wipe away (or try to pull a print) the inside exposed parts of the stencil. When that’s mostly cleaned off, add your second color to the insides and top of your stencil. Pull a print of the top colors. Then take off the stencil carefully. Pull another print with both the background colors and the top colors at once!

    starry iron-on-ink design close up

    Step 4: 

    Some of my prints had thick ink, so I allowed them to dry overnight. Remember, to lint roll your necktie fabric before starting the transfer process. 

    freshly lint rolled satin necktie

    Step 5: 

    Set up how you want to get your necktie to look with the designs from your printmaking session. This is an unconventional taping method to avoid press lines and make the best use of my prints. Some heat tape was used to tape the design to the protective paper and some to tape the necktie to the paper.

    alternative taping method to get the design onto the starry iron-on-ink satin necktie

    Step 6: 

    Ensure your secured design is “Sandwiched” between pieces of Artesprix protective paper. The siliconized paper is meant to protect your machine from the sublimation ink as well as other work surfaces. 

    sublimation sandwich over the necktie

    Step 7: 

    This project presses at 400°F for 60 seconds with only medium pressure. If you prefer printable directions go to Artesprix’s directions page.

    Step 8: 

    After your transfer time has elapsed it’s time for the “peek test”! Be careful as it is hot! Try to peek without removing the tape, that way if the project needs more time, your design is still lined up which will prevent ghosting!

    peek test for the starry iron-on-ink satin necktie


    Step 9: 

    While the blank is still hot, remove the design and quickly go over the design with a lint roller to help remove any press marks that may have occurred.

    Step 10: 

    If you are going to cover the whole front of the tie, like I did, repeat Steps 5-9. It took me four presses to get the job done. You could loop your tie and press two parts at once but I wanted to make sure I liked the transition and to limit potential unwanted white space or press lines. 

    starry iron-on-ink necktie finished product

    This Starry Iron-on-Ink Necktie reminds me of tie-dye but I also love the distressed ombre look. Next time my husband needs a tie, I’m gonna suggest this one, but in the meantime while he is away I think I need to get a button down to match. 

    Some other ways to use a gel printing plate with your Iron-on-Ink supplies are here and here. Interested in DIYing your gel plate – I’ve got a quick video for that. For more inspiration join the Facebook group!

    If you want to see what I’m up to as a Navy spouse in Japan – come follow along over on instagram (I put lots of fun foods that we try in my stories). Thanks for reading and hope you get inspired to create! Stars always inspire me!


    Until next time, 
    Chelsea Rose 


    **This post may contain affiliate links. That means that I may receive compensation if you purchase through the links I have provided. The price you pay for the product or service is not higher, but I may get compensated.** 

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    en_USEnglish